User's Manual

59
2. Frequency: Select the frequency band to configure professional settings.
3. Index: Indicates witch SSID is under setting.
4. SSID: A name whose length is less than 32 characters is used to identify a
wireless network.
5. Enable TX STBC: Enables or disables the Space Time Coding Block (STBC)
feature, as described in 802.11n specification, in transmitting (TX) direction.
6. Enable RX STBC: Enables or disables the Space Time Coding Block (STBC)
feature, as described in 802.11n specification, in receiving(RX) direction.
7. Set AP Isolated: Prevent wireless devices from communicating with each other
via router. This feature is useful if many guests frequently join or leave your
network. Select [Yes] to enable this feature or select [No] to disable.
8. Multicast Rate (Mbps): Setting transmission rate for multicast.
9. Short Guard Interval: Defines the length of time that the router spends for CRC
(Cyclic Redundancy Check). CRC is a method of detecting errors during data
transmission. Select Enable for a busy wireless network with high network
traffic.
10. DTIM Interval: DTIM (Delivery Traffic Indication Message) Interval or Data
Beacon Rate is the time interval before a signal is sent to a wireless device in
sleep mode indicating that a data packet is awaiting delivery. The default value is
three milliseconds.
11. Enable WMM: Enables or disables WMM capabilities in the driver. The WMM
capabilities perform special processing for multimedia stream data including
voice and video data.
12. Enable WMM APSD: Enable WMM APSD (Wi-Fi Multimedia Automatic
Power Save Delivery) to improve power management between wireless devices.
Select Disable to switch off WMM APSD.
13. Turbo QAM: 256-QAM (MCS 8/9) support. Wireless Mode must be set to auto.
14. Universal Beamforming: For legacy wireless network adapters which do not
support
beamforming, the router estimates the channel and determines the
steering direction to improve the downlink speed. (Also known as Implicit