User's Manual

2.4.1.3.2 WPS

WPS (Wi-Fi Protected Setup) is a wireless security standard that allows you to easily

connect devices to a wireless network. You can configure the WPS function via the

PIN code or WPS button. WPS supports the authentication of Open system,

WPA-Personal and WPA2-Personal. Not supported: Shared Key, WPA-Enterprise,

WPA2-Enterprise and RADIUS.

Steps to set WPS:

1. From the navigation panel, go to Advanced > Network > Wireless > WPS.

2. Frequency: Select an operating band (2.4 GHz or 5 GHz) for WPS. To change

the operating band, please disable the WPS function first.

3. Enable WPS: Selecting [On] to enable WPS. This can simplify the process of

connecting any device to the wireless network.

NOTE: WPS supports authentication using Open System, WPA-Personal, and

WPA2 - Personal. WPS does not support a wireless network that uses a Shared Key,