User's Manual

Server. This field only contains alphanumeric characters and dash symbols.

4. IP Pool Starting Address: Starting address that can be allocated to lan-side

devices.

5. IP Pool Ending Address: Ending address that can be allocated to lan-side

devices.

6. Lease Time: Defines the time that lan-side devices can use the assigned IP

address. When the lease time expires, the network client will either send renew or

rebind message to a DHCP server.

7. Default Gateway: IP address of the gateway for LAN.

8. DNS Server: IP address of a DNS server. DNS Server is used to resolve a DNS

into a numerical IP Address. By default, the router will act as a DNS server.

9. WINS Server: Windows Internet Naming Service manages interactions of each

PC with the Internet. If you use a WINS server, enter the IP Address of server

here.

10. Enable Manual: Assign fixed IP address for clients.

11. MAC: MAC address of lan-side device.

12. IP: IP address within DHCP IP Pool for an-side device.

13. Add/Delete: Add/Delete static IP.

14. Click Apply.

NOTES:

• We recommend that administrator use an IP address format of 192.168.1.xxx (where

xxx can be any number between 2 and 254) when specifying an IP address range.

• An IP Pool Starting Address should not be greater than the IP Pool Ending Address.