User's Manual

2.3.1.2.2 DHCP Server

DHCP server can assign each client an IP address and informs the client of DNS

server’s IP, default gateway’s IP and etc. This wireless router can allocate up to 253 IP

addresses for lan-side devices.

Steps to configure the DHCP server:

1. From the navigation panel, go to Advanced > Network > LAN > DHCP Server.

2. Enable DHCP Server: Enable DHCP server function which allows router to act

as a DHCP server to automatically assign IP addresses to network clients. If this

function is disabled, administrator has to manually set LAN devices.

3. Domain Name: Domain Name for clients who request IP Address from DHCP