User's Manual

2.4.1.2 LAN Settings

2.4.1.2.1 LAN

The LAN IP module allows administrator to modify lan-side IP address of the router.

Steps to modify the LAN IP settings:

1. From the navigation panel, go to Advanced > Network > LAN > LAN IP.

2. IP Address: The LAN IP address of wireless router. The default value is

192.168.1.1. In IP-based networks, data packets are sent to the network devices'

specific IP addresses.

3. Subnet Mask: The LAN subnet mask of wireless router. Its default value is

255.255.255.0

4. Click Apply.

NOTE: Any change to the LAN IP module will affect router’s DHCP settings.