User's Manual

Steps to set up DMZ:

1. From the navigation panel, go to Advanced > Network > WAN > DMZ.

2. Enable DMZ: Check to enable or disable DMZ.

3. IP Address of Exposed Station: LAN IP address of a client who can provide

DMZ service. This makes the device with this IP address expose to Internet.

Make sure that the server client has a static IP address.

4. Enable IPv6 DMZ: Check to enable or disable IPv6 DMZ.

5. IPv6 Address of Exposed Station: The client's LAN IPv6 address that will

provide the DMZ service and be exposed on the Internet.

6. IPv6 prefix for DMZ setting: The IPv6 DMZ address must be in the range of

IPv6 prefix. Show it for user to set valid DMZ address.

7. Click Apply.