User's Manual

2.3.6.7 NFS

Network File System Server is used to share the USB disk with clients via network.

Clients can mount the remote disk to a local directory for a faster speed than using a

Samba server. This page shows information about the NFS Server. To setup NFS, go

to Advanced > Servers > NFS.

Steps to set NFS:

1. From the navigation panel, go to Basic > Services > NFS.

2. Connect an external USB hard disk drive or USB flash drive to the router, then

device’s name will be displayed here.

3. Enable NFS: Enable or disable NFS service. When disabled, users can't access

the USB storage via the NFS service.

4. Safely Remove Disk: Click to safely remove the disk. When the USB disk is

ejected successfully, the USB status shows 'No device '.