User's Manual

27
3. Client Name: Select client from the list. The name in the list stands for the client
that is communicating with the router.
4. Client MAC: MAC address of the selected client.
Note: Client Name just makes it easier for administrator to distinguish lan-side
devices. The Client MAC in fact specify the very device under parental control.
5. Add/Delete: Click or to add/delete the profile.
6. Time Management: Click , then setup the client’s schedule timetable to
allow or deny client’s access to Internet.
7. URL Filter List: Router prevents lan-side device from accessing the URL in list.
8. Add/Delete: Click or to add/delete the profile.
9. Keyword Filter List: Router prevents lan-side device from accessing to
webpages contain the keyword in list.
10. Add/Delete: Click or to add/delete the profile.
11. Service Filter List: Router prevents lan-side device from communicating with
remote device with defined port in Port Rang and defined Protocol.
12. Add/Delete: Click or to add/delete the profile.
13. Click Apply.