User's Manual

2.3.3 LAN Setup

This module makes it easier for administrator to modify the default LAN IP Address.

Steps to modify LAN IP settings:

1. From the navigation panel, go to Basic > My Router.

2. LAN IP: The LAN IP address of the wireless router. Its default value is

192.168.1.1. In IP-based networks, packets are sent to the network devices'

specific IP addresses.

3. Subnet Mask: Subnet mask of wireless router. Its default value is 255.255.255.0

4. DHCP Server: DHCP (Dynamic Host Configuration Protocol) is mostly used to

allocate IP address for lan-side devices. And a DHCP server can inform lan-side

deviced of DNS server’s address, default gateway IP and etc. This wireless router

can allocate 253 IP addresses at most.

NOTE: It’s recommended for administrator to select DHCP Server for LAN IP

setting. If not, administrator has to assign IP address to lan-side device manually.

5. Click Apply.