User's Manual

119
the ACS using the CPE WAN Management Protocol. This username is used only
for HTTP-based authentication of the CPE.
6. Password: Password used to authenticate the CPE when making a connection to
the ACS using the CPE WAN Management Protocol. This password is used only
for HTTP-based authentication of the CPE.
7. Periodic Inform Interval: An absolute time reference in UTC to determine when
the CPE will initiate the periodic Inform method calls. Each Inform call MUST
occur at this reference time plus or minus an integer multiple of the Periodic
Inform Interval.
8. Periodic Inform Enable: Whether or not the CPE MUST periodically send CPE
information to the ACS using the Inform method call.
9. Connection Request Username: Username used to authenticate an ACS making
a Connection Request to the CPE.
10. Connection Request Password: Password used to authenticate an ACS making a
Connection Request to the CPE.
11. Click Apply.
3.4 Operation Mode
The Operation Mode page allows you to select the appropriate mode for your network.
Select your mode: wireless router, access point or media bridge.