User's Manual

116
3.2.2 Dynamic Routing
Dynamic routing means router can automatically maintain its routing table. Dynamic
routing has two basic functions: maintain routing table, and exchange routing table
with other routers.
Steps to set up Dynamic Routing:
1. From the navigation panel, go to Root > Router > Dynamic Routing.
2. RIP Key Authentication: Enable or disable RIP key authentication mechanism
when switching route with other routers.
3. RIP Key Chain: RIP key name.
4. RIP Key 0: RIP key value of RIP Key 0.
5. RIP Key 1: RIP key value of RIP Key 0.
6. Dynamic NAT IP: Single IP address from Charter supplied public IP subnets
used for all internal hosts traffic flow.
7. Alias: Friendly identifier for managed element
8. RIPIP: IP address to be advertised.
9. RIPSubnet: Subnet mask for RIPIP.