User's Manual

What’s in the box Set-up Camera Connect it to Gateway

1 2

Power ON/OFF WPS – 2 seconds

WPS – 2 seconds

Multi-Sensor Camera

Plug your QBee Camera into a power outlet.

Power it on. Wait for 60 seconds

Press the WPS Button for 2 seconds – LED blinks white.

Once the pairing is successful the LEDs of the Camera and

Gateway change to solid white.

The Camera will appear on your mobile and/or TV screen.

Multi-Sensor Camera Power Supply

1 LA

WWW.shiftcontrolplay.com

QB-MSC-FXL

PAGE 1
What’s in the box 1 Set-up Camera Power ON/OFF 2 Connect it to Gateway WPS – 2 seconds WPS – 2 seconds 1 Multi-Sensor Camera LA QB-MSC-FXL Multi-Sensor Camera WWW.shiftcontrolplay.com Power Supply Plug your QBee Camera into a power outlet. Power it on. Wait for 60 seconds Press the WPS Button for 2 seconds – LED blinks white. Press the WPS Button for 2 seconds – LED blinks white. Once the pairing is successful the LEDs of the Camera and Gateway change to solid white.
PAGE 2
Troubleshooting Support Reconnect Camera In case the Camera loses the connection to your QBee Gateway, they have to be paired with the Gateway again. Pairing – To do so, press the WPS button of your QBee Gateway for 2 seconds. The LED on the Gateway will start blinking in white. Then press the WPS button on the Camera for 2 seconds. The LED on the Camera will start blinking in white. When the pairing is done, the LED will light solid white.