User Manual

Illustrations contained in this document are for representation only.
iii
NORTH AMERICAN CABLE INSTALLER:
This reminder is provided to call your attention to Article 820.93 of the National Electrical Code (Section
54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building as
close to the point of cable entry as practical.
PacketCable and DOCSIS compliant
The Thomson DWG875/DWG875T is a voice-capable cable modem, which provides broadband Internet
access and telephone capability all in one unit! Also referred to as an Embedded Media Terminal
Adapter (EMTA), this cable modem connects to cable systems using DOCSIS and PacketCable standards.
(Check with your cable operator for compatibility.)
The Thomson DWG875/DWG875T offers a high-speed connection to the Internet using an Ethernet
connection.
If you have subscribed to telephone service from your cable operator, you will be able to place regular
phone calls using your home phone(s) and/or fax machine. The Thomson DWG875/DWG875T provides
two RJ-11 connectors for your phone or home phone system, allowing one or two line service.
Operating Information
Operating Temperature: 0˚ to 40˚ C (32˚ to 104˚ F)
Storage Temperature: -40˚ to 70˚ C (-40° to 158° F)
Humidity: 5% ~ 95% non-condensing
If you purchased this product at a retail outlet, please read the following:
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here
and record the serial and model numbers in case you need them. The numbers are located on the
bottom of the product.
Model No. ____________________________Serial No ________________________________
Purchase Date: ________________________Dealer/Address/Phone: _________________________