User's Manual

Chapter 3: Connections and setup
35
Illustrationscontainedinthisdocumentareforrepresentationonly.
Bandwidth:
ForwirelesssignalofthisAP
SidebandforControlChannel(40MHzonly):
IfBandwidthis40MHzthisfunctionwillbeenabled.
Controlchannel:
Choosethewirelesschanneltouse.
RegulatoryMode:
802.11dand802.11hforchoose.
OBSS(OverlapBasicServiceSet)Coexistence:
OverlappingBasicservicesetcoexistence,enableordisablethisfunction.
STBCTx:
Space–timeblockcodingisatechniqueusedinwirelesscommunicationstotransmitmultiple
copiesofadatastreamacrossanumberofantennasandtoexploitthevariousreceivedversions
ofthedatatoimprovethereliabilityofdata‐transfer.Defaultwas“Auto”.
RestoreWirelessdefaults:
Torecovertothedefaultsettings,pressthisbuttontoretrievethesettingsthenclickApply.