User's Manual

Chapter 3: Connections and setup
9
Illustrationscontainedinthisdocumentareforrepresentationonly.
ConnectiontoComputerandTelephone
Maketheconnectionstomodeminthefollowingsequence:
z ConnecttheplugfromtheACpowersupplyintothePOWERACADAPTERjackontheEMTA,and
plugthepowersupplyintoanACoutletinthewall.
z ConnectoneendoftheEthernetcabletotheEthernetportonthebackofyourcomputer,andthe
otherendtotheETHERNETportontheEMTA.


Fig.1:HowtoSetupYourDevice

Note:Useonlythepower
supplythataccompaniedthis
unit.Usingotheradapters
maydamagetheunit.
