User's Manual

 Scan a Bar Code with Camera
Using the rear camera to scan bar code.
1. Launch a bar code reading application or use Data Wedge.
2. Point the back of the TN450A1 at the bar code.
3. Press the scan button
Photo & Videos
Using the rear camera to take photos and capture video.
Note: Ensure device memory or extend Micro SD card is space is available.
GPS Information
 Acquiring satellite signals may take a few minutes.
 Without a clear view, acquisition takes longer and possible unable to catch the
position quickly.
 Turn off GPS application if no use.
Near Field Communication (NFC) Feature
Allow Data exchange in short-range (less than 4cm) when the phone touches another
device. The NFC areas, being of both a phone and other NFC compatible device (ex:
tags, reader, phones and so on.), should be close to one another for communication.