User's Manual

Chapter 2: Basic Operation
Using Your Device in a Car
A car holder and a car charger are supplied with your device.
Using the Car Holder
Select an appro
p
riate location for the car holder. Never place the holder
where the driver’s field of vision is blocked. If the car’s windshield is tinted
with a reflective coating, an external antenna (optional) may be needed to
route to the top of the car through a window. When closing the car window,
be careful not to pinch the antenna cable. (An adequate space may be left, as
needed, for a car with an anti-jamming window design.)
Caution
The car holder consists of a bracket and a stand. Use the car holder to fix your device in a vehicle.
Make sure that the GPS antenna has a clear view of the space.
For initial positioning, remain at the same spot with a clear view of the space. The GPS may take a
few minutes to find its current location initially.
Connecting the Car Charger
The car charger supplies power to your device you are using in a car.
Caution
To protect your device against sudden surges in current, connect the car
charger only after the car engine has been started.
Follow the instructions below to connect the car charger to the car cigarette socket.
1. Connect one end of the car charger to
the power connector of your device.
2. Connect the other end to the 5V
cigarette lighter in the car to power and
charge your device. The indicator on
the car charger lights in green to
indicate that power is being supplied to
your device.
5