User's Manual

Step 16: With “Enable this connection to be used by WinGate“ selected, then type your personal

information, such as “Username”, “Password” etc. Be sure that the information you type must

be the same settings with your target ISP connection. Click “OK”.

4.2 WinGate™ Installation for “Client”

Step 1: After driver installation, click “Start”, and then choose “Run”.

Step 2: Click the “Browse” button, and look in your CD-ROM drive.

Step 3: Select the “Wingate” folder. Then select the “setup.exe” file and click the “Open” button.

Step 4: Click “OK” .

Step 5: Home Network Setup Wizard appears to guide you through the setup process of WinGate

software; click “Next” and follow the onscreen instructions to finish the installation.

Step 6: When Windows asks your computer’s name again, make sure the name must be unique from

other computers. Then click “Next”.