User's Manual

Quick Installation Guide
EAO2001S(RoHS) Enterprise Access Point
Copyright © Askey, INC. All rights reserved.
2.
LED
1
RUN/ALARM_LED
An LED indicator to show the system status
2
2.4G_LED
An LED indicator to show the 2.4G status
3
5G_LED
An LED indicator to show the 5G status
4
WAN_LED
An LED indicator to show the internet connection status
I/O Port
1
N-type Connector
For connecting to an antenna (RF Card A x 3, RF Card B x 3)
Utilize all connectors for optimized MIMO performance.
2
Console
Console port for debugging
3
Reset
Press once to restart the system; to reset the system to factory
default settings, hold for more than 5 seconds.
4
LAN
(Uplink (PoE) Port)
Offers uplink connection. This port can be used to connect to a
controller, gateway, or directly to the Internet. 802.3at PoE is
also supported