User Manual

Chapter 2: Web Configuration

into fragments no longer than the value of the threshold. (Value range: 256~ 2346)

RTS Threshold:

Set the value for sending a request to the destination. All the frames of a length greater than the threshold

that you set here will be sent with the four-way frame exchange. And, a length less than or equal to the

value that you set will not be proceeded by RTS. (Value range: 0~ 2347)

54gTM Network Mode:

There are three modes for you to choose, please check the specification of your wireless card and choose

a proper setting.

54gTM Protection:

Select Auto to turn on the 54gTM protection; select Off to turn down the protection.

XpressTM Technology:

When Xpress is turned on, aggregate throughput (the sum of the individual throughput speeds of each

client on the network) can improve by up to 27% in 802.11g-only networks, and up to 75% in mixed

networks comprised of 802.11g and 802.11b standard equipment.

Rate:

It decides the speed of data transmission. There are several rates provided here for you to choose. Choose

any one of it according to your needs by using the drop-down menu.

Output Power:

This setting decides the output power of this device. You may use it to economize on electricity by

selecting lower percentage of power output.

Illustrations contained in this document are for representation only.