User Manual

Chapter 2: Web Configuration
49
Automatic Security Configuration
Fig. 37
WiFi Protected Setup (WPS): It is a secure way of configuring and connecting your WiFi access point.
WPS Config: It will help to Enable or Disable the WPS feature.
Device Name: By using this you can change the factory default to a name of your choice up to 32 characters
long as like SSID
WPS Setup AP: Here we no need to do any configure. So, just skip this step.
WPS Add Client: There are two methods “Push-Button” and “PIN”. Select the method you want.
If you select “Push-Button”, then the WPS Setup AP page will appear as shown below.
Fig. 38
Illustrations contained in this document are for representation only.