User Manual

Chapter 2: Web Configuration

2. WAN

You can configure the optional internal DHCP server for the WAN on this page. Select different WAN

Connection Type will lead to different contents. Take the WAN connection type-DHCP for example, you

can release and renew the WAN lease by pressing the buttons.

You can enter a spoofed MAC address that causes your gateway networking stack to use that MAC

address when communicating instead of the usual WAN MAC address, e.g., if the MAC address is

00:11:e3:df:66:95, this spoofed MAC address could be 00:11:e3:df:66:97 or any desired MAC address.

Fig. 14

3. Computers

This page displays the status of the DHCP clients and current system time. You can cancel an IP address

lease by selecting it in the DHCP Client Lease Info list and then clicking the Force Available button. If

you do so, you may have to perform a DHCP Renew on that PC, so that it can obtain a new lease.

Fig. 15

Illustrations contained in this document are for representation only.