User's Manual

Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only. 1
Introduction
EMTA Gateway Features
z CableLabs DOCSIS 1.0/1.1/2.0, CableHome 1.1 and PacketCable 1.0/1.1 (upgradeable to
PC1.5) Standard Compliant
z Integrated battery backup for telephony
z Support Multiple Provisioning Modes.
z Support PacketCable NCS 1.0 MGCP1.0 (Media Gateway Control Protocol)
z Support PacketCable Multimedia specifications
z 4 Standard RJ-45 connector for 10/100BaseT Ethernet with auto-negotiation and MDIS
functions
z USB Connector for USB interface
z IEEE802.11g Wireless Access Point
z Two RJ-11 Foreign Exchange Station (FXS) ports for IP telephony (with CO over-voltage
protection, unit to be undamaged when plugged in local LEC RJ-11)
z Support simultaneous voice and data communications
z Two simultaneous voice conversations in the different FXS ports with different CODEC: PCM
A-law, PCM μ-law, G.729, G.729a, G.729e, and G.728
z Echo Cancellation
z Voice Active Detection (VAD)
z DTMF detection and generation
z Comfort Noise Generation (CNG)
z Support V.90 fax and modem services
z Transparent bridging for IP traffic
z RSA and 56 bit DES data encryption security
z Support VPN end point
z Multicast pass-through with MIBs to enable/disable multicast pass through feature
z SNMP network management support
z Remote operating firmware downloading
z Support Web pages and private DHCP server for status monitoring