User's Manual
Table Of Contents
- Introduction
- EMTA Gateway Features
- What’s on the CD-ROM
- Accessing the Diagnostics Display through the CD-ROM
- Computer Requirements
- Setting the Modem in the Stand
- Wall Mounting
- EMTA Gateway Overview
- Connecting the EMTA Gateway to a Single Computer
- Attaching the Cable TV Wire to the EMTA Gateway
- Important Connection Information
- USB Connection to One Computer
- USB Connection - Using the Installation Wizard
- USB Connection - Without Using the Installation Wizard
- Using Windows 2000 for USB Connection
- Using Windows Me for USB Connection
- Using Windows XP for USB Connection
- Ethernet Connection to One Computer
- Connecting More Than Two Computers to the EMTA Gateway
- Telephone or Fax Connection
- Activating the EMTA Gateway
- Accessing the Internet
- Status
- Wireless
- Frequently Asked Questions
- General Troubleshooting
- FCC Declaration of Conformity and Industry Canada Information
Chapter 3: Additional Information
42
call your Cable company.
z Verify that the Cable Modem service is DOCSIS-compliant and PacketCable-compliant by
calling your cable provider.
I don’t hear a dial tone when I use a telephone.
z Telephone service is not activated. If the rightmost light on the EMTA Gateway stays on
while others flash, check with your TSP or cable company.
z If the EMTA Gateway is connected to existing house telephone wiring, make sure that
another telephone service is not connected. The other service can normally be
disconnected at the Network Interface Device located on the outside of the house.
z If using the second line on a two-line telephone, use a 2-line to 1-line adapter cable.
For more Usage and Troubleshooting Tips use the web site links provided on the CD-ROM:
http://www.cable-modem.rca.com/help