User's Manual
Table Of Contents
- Introduction
- EMTA Gateway Features
- What’s on the CD-ROM
- Accessing the Diagnostics Display through the CD-ROM
- Computer Requirements
- Setting the Modem in the Stand
- Wall Mounting
- EMTA Gateway Overview
- Connecting the EMTA Gateway to a Single Computer
- Attaching the Cable TV Wire to the EMTA Gateway
- Important Connection Information
- USB Connection to One Computer
- USB Connection - Using the Installation Wizard
- USB Connection - Without Using the Installation Wizard
- Using Windows 2000 for USB Connection
- Using Windows Me for USB Connection
- Using Windows XP for USB Connection
- Ethernet Connection to One Computer
- Connecting More Than Two Computers to the EMTA Gateway
- Telephone or Fax Connection
- Activating the EMTA Gateway
- Accessing the Internet
- Status
- Wireless
- Frequently Asked Questions
- General Troubleshooting
- FCC Declaration of Conformity and Industry Canada Information
Chapter 2: Web Configuration
32
WPA/WPA2: (Wi-Fi Protected Access)
It must be used in conjunction with an authentication server such as RADIUS to provide
centralized access control and management. It can provide stronger encryption and
authentication solution than none WPA modes.
WPA2 is the second generation of WPA
security
WPA-PSK (WPA-Pre-Shared Key) /WPA2-PSK (WPA2-Pre-Shared Key):
It is useful for small places without authentication servers such as the network at home. It
allows the use of manually-entered keys or passwords and is designed to be easily set up
for home users.
WEP Encryption:
You can choose 64-bit or 128-bit according to your needs. If you choose Disabled, the
Network Keys will not be shown on this page. If selected, the data is encrypted using the key
before being transmitted. For example, if you set 128-bit in this field, then the receiving
station must be set to use the128 Bit Encryption, and have the same Key value too.
Otherwise, it will not be able to decrypt the data.
WEP Encryption