User's Manual

Chapter 3 Wireless LAN Cards Monitor Utility

You can connect your computer to a network in one of the following two ways. Refer to

sequential sections for configuration:

Ad Hoc

Connecting to other Wireless LAN Card equipped computers, forming a

wireless network.

Infrastructure

Connecting to a wired/wireless network through an Access Point.

Connecting to Other Wireless LAN Cards (Ad-Hoc Mode)

1. In the taskbar, double-click the Wireless LAN Cards Monitor icon to display the

Wireless LAN Cards Monitor Utility dialog box.

2. Click the

Status tab.

3. In the

Operating Mode list, select Ad-Hoc.

4. In the

Channel list, select the Channel Number which you want to use.

5. In the

SSID list, type the Service Set ID (SSID) of the Wireless LAN group. All wireless

clients must use the same SSID in order to communicate with each other.

6. Click

Submit.

7. Click

Exit if you wish to exit the utility.

Note: The MAC Address indicates the MAC address of your computer.