User Manual

Chapter 2:WEB Configuration
50
Illustrations contained in this document are for representation only.
4.Bridging
The Bridging page provides a location where settings can be adjusted related to the WDS (Wireless
Distribution System) feature.
WDS is a system that enables the interconnection of access points wirelessly. It may also be referred to as
repeater mode because it appears to bridge and accept wireless clients at the same time (unlike traditional
bridging).
The wireless gateway can be placedin a mode that allows the gateway to communicate with other
page to designate the Remote Bridges the gateway is allowed to communicate with, and to select the
Wireless Bridging mode.
Fig. 43
Wireless Bridging:
Choose Disabled to shutdown this function; select Enabled to turn on the function of WDS.
Remote Bridges:
Enter the MAC Addresses of the remote Bridges to relay the signals toeach other.
Apply:
After proper configuration, click Apply to invoke the settings.