User Manual

Chapter 2:WEB Configuration
42
Illustrations contained in this document are for representation only.
2. 802.11/Primary Network
This page allows you to configure the Network Authentication. Itprovides several different modes of
wireless security. You will have to enter proper informationaccording to the mode youselect.
Fig. 31
Primary Network: Used to Enable or Disable the whole Primary Network feature.
Network Name (SSID): By using this you can change the factory default to a name of your choice up to 32
characters long.
Closed Network: This control is used to hide or reveal your network name (SSID)to any remote, wireless
equipped PC in the area that may be scanning WiFi channels to find available WiFi networks. The gateway WiFi
radio frequently transmits a beacon signal which can contain this network name(SSID). If you set Closed Network
to Enable, your SSID is included in that beacon, and is therefore detectable by any nearby wireless equipped PCs in