User Manual

Chapter 1: Connections and Setup
10
Illustrations contained in this document are for representation only.
Connecting the Wireless Gatewayto a Single Computer
This section of the manual explains how to connect your Wireless Gatewayto the Ethernet port on your
computer and install the necessary software. Please refer to Figure 1 to help you connect your Digital
Cable Modem for the best possible connection.
Attaching the Cable TV Wire to the Wireless Gateway
1. Locate the Cable TV wire. You may find it one of three ways:
a. Connected directly to a TV, a Cable TV converter box, or VCR. The line will be connected to
the jack which should be labeled either IN, CABLE IN, CATV, CATV IN, etc.
b. Connected to a wall-mounted cable outlet.
c. Coming out from under a baseboard heater or other location. See Figure 1 for the wiring
example.
Notes: For optimum performance, be sure to
connect yourWireless Gatewayto the first point
the cable enters your home. The splitter must be
rated for at least 1GHz.
Fig. 1: Basic Home Wiring