User's Manual

DHCP SERVER
35
Step 2:If the iMac get an invalid IP, select “Using DHCP Server” in
“Configure” field.
Click the “Close box” at the upper left corner to close the “TCP/IP”
window
Step 3: Click the “Save” in the prompted message box.
Step 4: You need to wait about 2 minutes and open “TCP/IP” window to see
the new TCP/IP status…
5.4 Renew PC IP Address
There is a chance that your PC does not renew its IP address after cable
modem is on line and the PC cannot access the Internet. Please follow the
procedures below to renew PC’s IP address after the cable modem is on
line.
Step 1: Click “Start“, point to “Run“, and click to open the “Run“ windows.