WLU5250-D143(RoHS) Quick Installation Guide Revision: 1.0 Askey Computer Corp. 10F. No.119, Chien-Kang Rd., Chung-Ho, Taipei, Taiwan, R.O.C.
1.Appearance ……………………………………….………………………….………………2 2 Test environment ............................................................................................................. 3 2.1 Preparation. ................................................................................................................................. 3 2.2 Procedure for setting devices ................................................................................................... 3 3 Image Upgrade................................
1.
2 .Test environment 2.1 Preparation. 1.1.1 Device - XI3( Set Top Box ) 1 EA. - Serial-Box - Serial-Cable 1 EA. 1 EA. - USB Memory stick 1.1.2 File - XI3 Loader Image (File Name: Xi3v1-H_Loader.bin) - XI3 Kernel Image (File Name: pne_vmlinux.bin) - XI3 RootFS Image (File Name: pne_humax.squashfs) 2.2 Procedure for setting devices 1. Connect RS232 cable to PC (Window: Hyper terminal) and Serial-Box 2. Connect cable in Serial Box to board. 3. Run hyper-terninal and it will be printed.
3 Image Upgrade 3.1 Procedure for flashing Loader and Main Image 1. Copy Xi3v1-H_Loader.bin to USB memory stick. 2. Copy pne_vmlinux.bin to USB memory stick. 3. Copy pne_ humax.squashfs to USB memory stick. 4. Connect the USB memory stick to XI3. 5. Reboot 6. Current loader will find new image and then will be upgrade 4.Wifi 4.Wifi Test 4.1 Procedure for setting WIFI 1. Run hyper-terminal to take the logs through serial cable. (It should be set configuration for RS232 cable on hyper-terminal.) 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
