User's Manual

\Vn Single Line Connect Message Enable
%Cn Enable/Disable Data Compression
%En Enable/Disable Line Quality Monitor and Auto-Retrain or Fallback/Fall Forward
%L Report Received Signal Level
%Q Line Signal Quality
+MS Select Modulation
** Download to Flash Memory(For models with flash Memory only)
@ Answer
, Pause
! Initiate a Hookflash
; Return to Command State after Dialing
^ Tone Control
J Perform MNP
K Enable Power Level
L Re-dial Last Number
P Pulse Dialing
S Dial a Stored Number
T Touchtone Dialing
W Wait for Dialtone
A/ Repeat Command
+++ Escape
E - GLOSSARY
ASCII - An acronym for American Standard Code for Information Exchange. ASCII is a seven-bit code
which defines 128 standard characters, including control characters, letters, numbers, and symbols. An extra
128 characters comprise the extended ASCII set.
Baud Rate - The transmission rate between two serial devices, e.g., modems, fax machines, etc.
Measured in Bits Per Second.
Blind Dialing - In blind dialing, the modem continues to dial, regardless of the existence of a dialtone,
ring, or busy signal.