User's Manual

Q Result Code Display
Sn Reading and Writing to S Registers
T Set Tone Dial as Default
Vn Select Word or Digit Result Codes
Wn Negotiation Progress Reporting
Xn Extended Result Codes
Yn Enables or Disables Long Space Disconnect
Zn Reset
&Cn Select DCD Options
&Dn DTR Option
&F Fetch Factory Configuration
&Gn Set Guard Tone
&Kn DTE/Modem Flow Control
&Mn Communication Mode
&Pn Select Pulse Dialing Make/Break Ratio
&Qn Asynchronous Mode Selection
&Sn DSR Option
&Tn Testing and Diagnostics (See Chapter 4)
&V View Configuration Profiles
&Wn Store the Current Configuration to Nonvolatile RAM
&Yn Select the Default Profile
&Zn Store Telephone Numbers (n=0 to 3)
\An Select Maximum MNP Block Size
\Bn Transmit Break to Remote
\Gn Modem to Modem Flow Control (XON/XOFF)
\Kn Break Control
\Nn Operating Mode Control