User's Manual

4 - TESTING
4.1 Local Analog Loopback
4.2 Local Analog Loopback with Self-Test
5 - TROUBLESHOOTING GUIDE
6 - APPLICATION EXAMPLES
6.1 Dialing a Remote Modem
6.2 Dial a Stored Number
6.3 Manual Answer an Incoming Call
6.4 Auto Answer an Incoming Call
6.5 Voice to Data Switching
A - MNP 10 COMMANDS
B - CALLER ID COMMANDS
C - TECHNICAL SPECIFICATIONS
D - QUICK REFERENCE
E - GLOSSARY
F - ASCII CODE TABLE
i - FCC/DOC REQUIREMENTS
i -1 FCC General Information
The Federal Communications Commission (FCC) of the United States restricts specific uses of modems,
and places registration responsibilities on both the manufacturer and the individual user:
1. The modem may not be connected to a party line or to a coin operated telephone.
2. The modem manufacturer must make any repairs to the modem to maintain valid FCC registration.
3. Notification to the telephone company is no longer required prior to connecting registered equipment,
but upon request from the telephone company, the user shall tell the telephone company which line the
equipment is connected to as well as the registration number and ringer equivalence number of the
registered protective circuitry. FCC information is printed on a label on the bottom of the modem.
i - 2 FCC Notice