User's Manual

3
2, Basic Buttons Operation
Power on: Press multifunction button for 2 seconds. Blue LED flashes 2 times. Headset
turns on.
Power off: Press multifunction button for 3 seconds. Red LED turn off after flashes 2
times. Headset turns off.
Volume adjust: Each press on 'Volume up' or 'Volume down' buttons, one level voice
volume changes. When volume reaches to Max or Minimum, "Tick" reminding voice
occurs.
Play/Pause: Short press multifunction button, music pause. Press it again, music
continues.
Previous: Short press 'Previous' button, music turns to previous one.
Next: Short press 'Next' button, music turns to next one.
Answer Call: Short press multifunction button to answer phone call.
End call: Short press multifunction button, phone call ended.
Reject call: Press 'Volume up' button for 2 seconds to reject a call.
Transfer call: During the phone call conversation, press 'Volume up' button for 2
seconds, call switches to mobile phone. Press 'Volume up' button, for 2 seconds again,
call switches to headset.
Last number redial: In standby status, continuously press headset multifunction button
twice to redial the last number.
Call Mute function: Press 'Volume down' button for 2 seconds, call mute. Press
'Volume down' button for 2 seconds again, call mute cancel.
Battery Capacity status: When headset connects to iOS devices, iOS devices show
the headset battery power status on the upper right corner.
Charging: New headset has enough power for pairing and dialing out for several times.
When in low battery, please charging via USB cable for 2 hours. Red LED keep lighting
during charging, blue LED keep lighting, charging finished.
Reset Mode: Connect the headset to computer via Micro USB cable. When red LED
light flashes, headset reset finished.
3, Pairing (One headset support connecting 2 phone devices )
Pairing with one phone or other device
Make sure the headset is power off.
Press and hold the multifunctional button for 5 seconds to enter into the pairing mode.
Red LED & Blue LED flashes alternately.
Activate your phone or device Bluetooth function and search for headset. From the list
of found devices on your mobile phone, select the headset “” to connect it .follow the
instruction to enter “0000” as PIN if the mobile phone
reminder to need.
Headset or device can be used to play your phone music or dial phone call etc.