User Manual

signal. First to press the symbol “ALL” key at remote,then select the input channel that you
want. For example: to press the symbol “ALL” key, then press number 1 key to put the input
channel 1 signal to all output port; to press the symbol “ALL” key at remote,then press the
number 2 key, it can select input channel 2 signal to all output port.
6
．
The plastic film is strongly advised to remove it when the remote is not used for long
time.
Connection and operation:
*Connect according to the connection method in the above figure, source → display
device→ power
Spec
: