User Manual

Picture 1.2 IR panel showing
1
．
Firstly remove the plastic film in the rear board of the remote board.
2
．
The A, B, C, D signifies the A, B, C, D output.
3
．
The 1, 2, 3, 4 signifies the 1, 2, 3, 4 input.
4．Firstly press the left Letter Key,then press the right Number Key,the matched input
signal and output port will be connected. For example: to press A key and then press
number 4 key, the input 4 signal will be output to A port; to pres B key,then press the number
3 key, the input 3 signal will be output to B port.
5．To press the symbol “ALL” key at remote, it can set all output port to out the same input