USER GUIDE IMPACT 400 Not the actual front page 801.300 USG/400/AE-C 06.09.
USER GUIDE IMPACT 400
USER GUIDE LCD PANEL 2
USER GUIDE LCD PANEL TABLE OF CONTENTS 1 INTRODUCTION................................................................................... 5 2 MAIN FEATURES ................................................................................. 5 3 SUPPLIED MATERIAL .......................................................................... 6 4 OPTIONAL MATERIAL ......................................................................... 6 5 SETTING UP THE LCD PANEL ...................................................
USER GUIDE LCD PANEL This publication is printed on recycled paper. The information contained in this user guide is preliminary, and the products described herein are subject to change without prior notice. The symbols and are used in this publication to indicate Warning and Note respectively.
USER GUIDE 1 LCD PANEL INTRODUCTION The LCD panel is a state of the art projection device that can be connected to most computers and display true 800 x 600 resolution. The ability to display a multitude of colors as well as high resolution makes it the ideal choice for presenting computer generated text and graphics. Applications include presentations, software training, educational use, advertising, information boards and other situations where a small or large audience shares information.
USER GUIDE 3 LCD PANEL SUPPLIED MATERIAL A complete set includes the following components : 1. 2. 3. 4. 5. 6. 7. 4 LCD Panel VGA-Cable Cable-Adapt. MAC mon. Cable-Adapt. MAC comp. Mouse Cable Mouse Adapter PC Mouse Adapter Mac 8. 9. 10. 11. 12. 13. Power -5, 12, 5 V Power Cord BatMouse Remote Control Batteries Attaché Case User Guide OPTIONAL MATERIAL Optional cables and adapters are available for special computer sources.
USER GUIDE 5 LCD PANEL SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware of static electricity that may build up, especially in the dry season and when operating on synthetic carpets. Discharge any static electricity by touching a metallic surface before you start. Place the LCD panel on top of a transmissive overhead projector (OHP). Select a high intensity type projector, for instance 400W halogen or 575W metal-halide.
USER GUIDE 5.1 LCD PANEL COMPUTER Connect the LCD panel, computer, monitor and power supply as shown in the rear foldout. Connect cable (1) between the LCD panel and the computer. The LCD Panel can be attached to computers and supports up to 1024x768 image resolutions in compressed/panning mode. With Macintosh (Power MAC), resolutions up to 1152x870 is supported. Refer to the Compatibility table on page 23 for further details.
USER GUIDE 5.2 LCD PANEL RGB VIDEO The LCD panel can project video images from Video Cassette Recorder or Laser Disk source using direct RGB connection with composite sync on H. When using the VGA-to-BNC adapter (Part# 301.111), connect the RedGreen-Blue to the RGB source and connect composite sync to the black H connector. The yellow V connector remains unused. This will give a projected video image resolution of 768x576 in PAL and 640x480 in NTSC.
USER GUIDE APPLICABLE ADAPTERS: MOUSE Microsoft 2 key compatible (9 pin serial port) PS/2 compatible mouse Macintosh ADB-bus mouse *) LCD PANEL ADAPTER PC *) DRIVER Microsoft PS/2 (option) MAC IBM PS/2 Self detecting Please note that some computers using the Microsoft 2 key mouse may not allow the Y-split mouse adapter to work. A special straight PC adapter is available for this purpose.
USER GUIDE 6 LCD PANEL USING THE LCD PANEL The LCD panel has a set of connectors and controls that you need to know in order to operate the device correctly. 6.1 REMOTE CONTROL The infrared BatMouse remote control (RC) is the main user interface to the device. The RC is used to set the LCD panel correctly (to get the best possible viewing conditions) and to control the presentation. The figure shows the different keys of the BatMouse.
USER GUIDE LCD PANEL BATMOUSE KEYS : CONTROL FUNCTION CONTR Contrast (ratio between light and dark colors) BRIGHT Brightness (whiteness) TUNE Adjusts the stability of the image ON/OFF Turns the panel on/off RESET Defaults to standard settings BLACK Blackens the screen REAR Mirrors the image for rear projection FREEZE Holds the image displayed FREQ Adjusts the video frequency PAN Allows panning within oversized images (resolution >800x600) using cursor keys.
USER GUIDE 6.2 LCD PANEL FRONT PANEL The front panel keyboard consists of a subset of the remote control keys. CONTROL TUNE BRIGHT RESET ON/OFF 6.3 BRIGHT TUNE ON/OFF RESET FUNCTION Adjusts the stability of the image Adjusts the brightness (whiteness) of the image Defaults to factory settings LED activity indicator CONNECTORS All connectors are positioned on the right hand side of the LCD panel. See the technical data section for pinouts of the various connectors.
USER GUIDE 7 LCD PANEL FEATURES The LCD panel has a variety of different features implemented. This chapter explains each feature in detail. 7.1.1 INTELLIGENT SAFECOOL SYSTEM The fan operation is controlled by the overhead projector light (OHP). This safety feature ensures that the fan is always operating as long as the OHP is turned on. When the OHP is turned off, the fan automatically stops to minimize noise. The power supply must be attached to the panel for the fan to work properly. 7.1.
USER GUIDE LCD PANEL 7.1.4 BRIGHTNESS The brightness is the amount of white in an image. The brightness is adjusted to the ambient lighting conditions. Usually, a bright, low contrast image is preferred. Use the BRIGHT keys to adjust brightness. See also Contrast. The brightness setting is stored individually for each source. 7.1.5 TUNE This feature enables a stable image. An unstable image can be seen as sideways instability or ‘swimming’. Press TUNE until a stable image is achieved.
USER GUIDE LCD PANEL resume on-line operation. Any other key pressed will also release FREEZE. 7.1.11 FREQUENCY This setting is provided for adaptation to computers and graphics adapters that are not recognized automatically by the panel. An incorrect frequency setting can be seen as an image to wide or too narrow, combined with vertical, unstable bands. To better see this effect, fill a large portion of your screen with a 50% grey pattern (alternating black and white pixels).
USER GUIDE 8 LCD PANEL PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptoms carefully if you experience any problem. The cure may be at your hands! Always press the RESET key and observe that the LED on the LCD panel is flashing. This indicates that the LCD panel receives signals from the remote control..
USER GUIDE LCD PANEL The remote control is not working - Check if the batteries need replacement (observe LED on panel) - Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the panel (max.
USER GUIDE 9 LCD PANEL MAINTENANCE From time to time, the housing and protection glasses may be cleaned with a damped, non abrasive cloth, possibly using a mild detergent to remove spots. The upper protection glass is not removable, as it only needs cleaning from the outside (the inside is sealed to the LCD module). The lower protection glass can be removed for cleaning. Place the unit upside-down on a soft cloth to avoid scratches. Unscrew the four screws holding the bottom glass in place.
USER GUIDE LCD PANEL The technical data may change without prior notice in order to improve the product performance. The apparatus is designed for indoor use and should not be operated outside the general environmental limits, as this may lead to permanent damage and violation of any warranties.
USER GUIDE LCD PANEL DISPLAY UNIT Full color (RGB) unit connecting directly to external video sources. SIZE WEIGHT LCD CELL COLOR RESOLUTION RESPONSE TIME CONTRAST RATIO PIXEL RESOLUTION SCREEN DIAGONAL MOUSE COMPATIBILITY VIDEO FREQUENCY HORIZONTAL FREQ. VERTICAL FREQ. COMPUTER INPUT DEFECTIVE PIXELS APPROVALS 310 x 310 x 42 mm 12.2 x 12.2 x 1.65 inch 2150 grams 4.7 pounds Active matrix TFT 16.7 million 30 ms 100:1 800 x 600 x 3 (RGB) 10.
USER GUIDE LCD PANEL POWER SUPPLY Primary switched universal type AC to DC converter. INPUT VOLTAGE OUTPUT VOLTAGES CONNECTOR APPROVALS 100 to 250 VAC +5VDC, +12VDC, -5VDC 5 pin DIN male CE, TÜV, UL, CSA, N, S, D, FI REMOTE CONTROL Infrared wireless remote control. BATTERIES RANGE 2 pcs LR03/AAA 1.
USER GUIDE LCD PANEL COMPATIBILITY The unit is predefined for the following interfaces. In addition, the user can configure the panel for other interfaces with a total maximum of 40 definitions altogether (predefined and user defined).
USER GUIDE LCD PANEL 12 CONNECTORS The pinouts of all external connectors are described. POWER This connector feeds regulated DC power to the panel. 2 4 5 1 3 5 PIN DIN FEMALE (FRONT VIEW) 1 2 3 4 5 GND GND +5VDC -5VDC +12VDC MOUSE This connector is used for mouse control.
USER GUIDE LCD PANEL 13 FCC STATEMENT This equipment has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules.
USER GUIDE LCD PANEL 14 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of the surroundings. Where possible, recyclable materials are used. ITEM PACKAGING MECHANICS ELECTRONICS LCD MODULE RECYCLING / HANDLING Only recyclable materials are used Only recyclable plastics and metal is used. Recycling codes are moulded in the plastic. Metal parts are painted aluminium and steel. No CFC is used during manufacture. No components that require special handling are used.
USER GUIDE LCD PANEL 15 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of your dealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the original packaging material), enclose a copy of your sales receipt and a description of the problem you experience, and ship prepaid to : ASK AS Customer Service Department RMA ................
USER GUIDE LCD PANEL 28
USER GUIDE LCD PANEL 16 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the computer. 1. 2. 3. 4. 5. * VGA Cable Mouse Cable Power Supply Cable-Adapter MAC-mon. Cable-Adapter MAC-comp. or other applicable comp./mon. adapters 6.
801.300 USG/400/AE-C 05.09.
