Service manual

Nacho Family Service Manual 31
Top Enclosure
The top enclosure covers the top half of the projector. Once you remove the top enclosure, you have access to a
number of parts inside the projector.
The top enclosure includes the keypad, the LCD/keypad ECA, the speaker and the elevator button. These parts are
not available separately. When you replace the top enclosure, adhere a new brand label to the top.
1 Remove the front bezel (page 28).
2 Carefully place the projector on its end so that the projection lens faces upward.
3 Use a T10 driver to remove the three silver M3x25 Plastite screws that fasten the bottom enclosure to the
top enclosure. The fourth screw was removed to access the front bezel.
NOTE You may need to work the screw out of the hole by using a magnetized driver.
4 Turn the projector right side up on the on work surface.