User manual

- 45 -
Result codes:
OK n=0-1
Error Otherwise
Written to registry.
&Zn Stores dial string
Stores/Displays dial string (up to 47 characters)
&Zn=s Store dial string (n=0-4)
&Zn=L Store the last dialed string (n=0-4)
&Zn? Display the nth string
&ZL? Display the last dialed string
Written to registry.
AT\ Commands - Error correction control
\An
*
Maximum MNP block Size
\A0 64 characters maximum block size
\A1 128 characters maximum block size
\A2 192 characters maximum block size
\A3 256 characters maximum block size
Result codes:
OK n=0-3
Error Otherwise
Related S-Reg: S<basereg+1> of V.42 registers
\Bn Transmit break to remote (-)
In non-error correction mode, the modem will
transmit a break signal to the remote modem with a
length of n*100ms. If a number above 9 is entered,
9 is used.
Result codes:
OK if connected in data modem mode
Error if not connected or if connected in fax