User manual

- 44 -
&Rn Controls RTS behavior
Controls the RTS output behavior.
Note: This command is supported for
compatibility.
It has no actual effect
&R0 RTS ignored
&R1 Modem receives data only on RTS (NA)
Result codes:
OK n=0 or 1
Error Otherwise
Related S-Reg: S61
&Sn Controls DSR behavior
Note: This command is supported for
compatibility.
It has no actual effect.
&S0 DSR override (is assumed to be ON all the
time)
&S1 DSR follows circuit definition
Result codes:
OK n=0 or 1
Error Otherwise
Related S-Reg: S64
&V Display Active profile, Stored Profiles, Stored
Phone Numbers (Equivalent to I4-I7 combined)
&Wn Writes current configuration
&W0 Write to template 0
&W1 Write to template 1