User manual

- 43 -
&Fn Sets factory configuration
Select one of the factory settings.
&F0 Select factory setting 0
&F1 Select factory setting 1
Result codes:
OK n=0-1
Error Otherwise
Related S-Reg: S59
&Hn
*
Sets flow control
Select the user defined configuration.
&H0 Flow control disabled (NA)
&H1 “HW” flow control RTS/CTS (emulation)
Result codes:
OK n=0-1
Error Otherwise
Related S-Reg: S62
&Kn Same as %Cn
&Pn
*
Set pulse dial make/break ratio
&P0 US & Canada 39%/61% (10 pps)
&P1 UK & Hong Kong 33%/67% (10 pps)
&P2 Same as 0, except at 20 pps
&P3 Same as 1, except at 20 pps
Result codes:
OK n=0-3
Error Otherwise
Related S-Reg: S28