User manual

- 35 -
Related S-Reg: S16
Vn
*
Verbose/Numeric result codes
Select the time of result messages sent to the
DTE.
For a list of result codes and verbal messages
see X command.
V0 Short form (numeric) result codes to be
sent to DTE.
V1 Long form (verbose) result codes to be
sent to DTE.
Result codes:
OK n=0 or 1
Error otherwise
Related S-Reg: S15
Xn Extended result codes
Select the subset of result codes to be used by
the modem to the DTE.
If the modem is in fax mode (+FCLASS=1), the
only message sent to indicate connection is
“CONNECT” without a speed indication.
X0 Supported messages: OK, CONNECT,
RING, NO CARRIER and ERROR, Blind call
enabled.
X1 Supported messages: OK, CONNECT
xxxx, RING, NO CARRIER and ERROR,
Blind call enabled.