User manual

- 34 -

Related S-Reg: S16

Quiet result codes control

Q0 Enable sending result codes to DTE.

Q1 Disable sending result codes to DTE.

Result codes:

OK n=0 or 1

Error Otherwise

Related S-Reg: S14

S Read/Write S-Register

This command has a few derivatives:

Sn=v Sets the value v (decimal) to S-register n

(v=0-255)

Sn? Displays the value of S-register in decimal

format (3 digits)

Note: Some registers are read-only

Result codes:

OK All parameters valid

Error Invalid S register or value. Trying to write

to a read-only register

T Tone dialing

Forces tone dialing. Applies to subsequent dialing

commands.

This command holds until the next T dial modifier

or T command is received.

This command changes S14 to reflect the current

dialing mode.