User manual

- 28 -
B0 Connect at V.22 1200 bps
Result codes:
OK n=0
Error Otherwise
Dn Dial
Directs the modem to go on-line, dial according to
the string entered, and attempt to establish a
connection.
The Dial String may consist of any of the
characters described below:
* T Tone dialing (first character in the string)
P Pulse dialing (first character in the string)
L Redial last dialed number (first character
in the string)
0-9 Digits 0 to 9.
* Asterisk (tone only)
# Hash (tone only)
W Wait for dial tone; the modem will wait for
dial tone before dialing the digits following
“W”. S6 register will be used for timeout.
(X3 or higher)
, (Comma); Pause for the time specified by
S8 before resuming the dialing
; (Semicolon) Return to command mode
after dialing. This allows the user to issue
additional AT commands while remaining
off-hook. Actual call progress will be
entered only after a dial command issued
without the “;” terminator.
S=n Dial the number stored in the directory;
n=0-3 (see &Z).