User's Manual

Page | 33
6.3 Output Mode
An output may be set in any of the 5 Output modes. User must set the output mode to
suit the application .
Output Mode
Function
Latch
Output in activate mode
Toggle
Output set to toggle mode
Pulse
Output is in pulse mode
Cycle
Output cycles with ON and OFF time
Act By Schedule
Output activated by a schedule
Example: Input 3 is set to trigger Output 1
Latch mode:
When Input 3 is in normal state, Output 1 will be in “OFF” state. When Input 3 activates,
Output 1 will now switch to “ON” state, it remains at this state even after Input 3 is
restored to normal.
Input 3
Output 1
Normal
OFF
1
st
Activate
ON
2
nd
Activate
Remain ON
3
rd
Activate
Remain ON
4
th
Activate
Remain ON