User's Manual

Page | 28
Arm:
This is the default mode and all inputs activation will have alarm event report back to
IBSS.
Disarm:
This is to disable the alarm function. Inputs activation will not have any alarm event
report to the IBSS.
Disarm By Schedule:
This mode is to disable the input alarm function during the time zone defined by the
Schedule.
If the time zone is set to “09:00 – 16:59”, the table below illustrates the operation.
Input Unarmed and
no event report
DisarmBySchedule Mode
00:00 09:00 16:59 23:59
Arm
Arm
Disarm
Prior to 09:00, the input is in “Arm” mode, this means any activation of the input will
trigger an alarm event.
From 9:00am to 17:00pm P908 is unlocked by “Disarm” mode. No alarm event will be
reported. At 17:00, P908 is revert back to arm mode.