Installation Instructions
asimom_official
@iASIMOM
Welcome
Thank you for purchasing ASIMOM Rhyme I Bluetooth speaker.
for future reference.
Enable the Bluetooth feature on your smart device. Search and select
"ASIMOM Rhyme I" on the Bluetooth list. Once connected, you can
1. Turn on the two ASIMOM Rhyme I Bluetooth speakers.
2. Choose one speaker as the main speaker. Press and hold the "ADD"
speaker.
4. When the two speakers succeed stereo pairing, you will hear the
blue breath light, and the secondary speaker is a solid blue light.
1. The secondary speaker would reconnect with the last device if they
used to be connected. Press and hold the of the second speaker to
disconnect from the device. Then the second speaker starts to
Steps:
1. Make sure that your Bluetooth device is within 10 meters of the speaker.
2. Press and hold to disconnect the previous Bluetooth device.
steps again.
support_us@iasimom.com for help.
Music plays in the download / copy order.
Set Up True Wireless Stereo Pairing
not charge
Two Rhyme I
speakers cannot
get stereo pair
Make sure two speakers are turned on, and
both are not in Micro SD card mode.
Press and hold to disconnect both speakers
from Bluetooth devices.
Try pairing steps as manually again.
Speaker cannot
pair with the
Bluetooth
device
Check if the USB cable can be used to charge other
devices.
Check whether the speaker can be charged by other
good quality charging cables.
Be sure to use the original charging cable or a
high-quality charging cable.
from your Bluetooth device. Remove the speaker
from the device’s Bluetooth list and connect it again.
Press and hold of the speaker to cancel its
Bluetooth memory.
devices.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
and can radiate radio frequency energy and, if not installed and used in
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
approved by manufacturer could void your authority to operate this
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
The device has been evaluated to meet general RF exposure requirement.
FCC Statement