Operation Manual

ManualsBrandsAsics ManualsAMAP01-WJ32

How to Use the Modes Available in Both SPM and PACE Functions

TIME Mode

Instr uc tion Ma nua l

AP01 : WJ32

When the TIME mode appears, “TIME” is shown in the lower row of the display for 1 second before the day of the week is displayed instead.

Day of the week

and date

Day of

the week

Month

and date

Current time

Normal display Large-digit display

SPM function PACE function

Ⓓ

Selection of TIME mode display format

Normal or large-digit display can be selected in the

BASIC SETTING mode.

Changeover between SPM and PACE functions

Pressing button D changes over the functions between SPM and PACE. Name

of the selected function is shown in the lower row of the display for 2 seconds.

* Once either of the 2 functions is selected, the watch is set to show the modes of the selected

function unless the function is changed over to the other by pressing button D in the TIME mode.

Turning on/off of the button operation confirmation sound

With each press of button A, the button operation confirmation sound is turned on and off alter-

nately. When it is turned on, the button operation confirmation sound mark is shown on the display.

* When the watch is purchased, the button operation confirmation sound is turned off.

* When the button is pressed to return to the TIME mode, and to show the newest total time display

in the SPM_LOG or PACE_LOG mode, the button operation confirmation sound beeps in a tone

different from usual.

Changeover between T1 and T2 time zones

Desired time zone (T1 or T2) can be selected by

keeping button E pressed for more than 2 sec-

onds. This dual

time function is convenient during

trip abroad. The time zone mark (T1 or T2) is

shown to indicate which time zone is selected.

Battery life indicator

This function enables you to know when the battery needs to be replaced.

The power reserve is shown graphically in three levels.

Button operation confirmation

sound mark

* The battery mark   indicates that the battery is nearing

its

end. When it is shown, replace the battery with a new one im-

mediately.

Time zone mark

Button “D”: Changeover between

SPM and PACE functions

Button “E” (pressed for more than 2

seconds): Changeover between 2

time zones (T1 and T2)

Button “B”: Mode change

Button “A”: Turning on/off

button operation

confirmation sound

Button “C”: Lighting up backlight