Operation Manual

29
Instr uc tion Ma nua l
AP01 : WJ32
How to use Shoes Impact Meter
Initialization of Shoes Impact Meter Input of Shoes Impact Value
Shoes Impact
Meter in use
Shoes Impact Meter
Should be deleted
Shoes Impact Meter
has been initialized.
* When the watch is purchased, the shoes impact value is set to 0.
B
Keep the button
pressed for 2 more
seconds or longer.
Beep,
Beep,
Beep
Release button “B”.
* The Shoes Impact Meter display will not be initialized.
* If button B is released before the confirmation sound beeps, the Shoes Impact
Meter will not be initialized.
* The Shoes Impact Meter can be initialized in both the SPM_CHR and PACE_CHR
modes.
* By initializing the Shoes Impact Meter when a new pair of shoes is purchased, the
shoes impact value of the shoes can be estima
ted more accurately.
Initial display
Settable range of shoes impact value:
0 ~ 9999
How to set shoes impact value manually on “SH-1” display
󰒄 Keep button B pressed for more than 2 seconds in the TIME
mode to activate the BASIC SETTING mode.
* For the method of activating the BASIC SETTING mode, see P. 9.
󰒅 Press button E repeatedly to show IMPACT.
󰒆 Press button A or D to input the shoes impact value by
referring to the table above.
󰒇 After the input of the shoes impact va
lue is completed, press
button B to return the display to the TIME mode.
The two Shoes Impact Meter displays (SH-1 and SH-2) can be initialized separately. To use the Shoes Impact Meter with the shoes already in use, set the initial Shoes
Impact value on “SH-1” Shoes Impact Meter display, referring to the table below.
Accumulated distance run Shoes impact value
100km 62.5mile 100
200km 125.0mile 200
300km 187.5mile 300
B
Press for
more than
2 seconds
Confirmation sound